Elite Machinery

Haas SL-40 TCE CNC Lathe

Haas CNC Control 

This item is SOLD but we may still be able to help you!
Click here, let us know what you're looking for and and we will make every effort to provide you with the machine of your choice.
Year of manufacture: 02/2005
Serial number: 69407
Chuck size: 388 mm (15.3 inch)
Turret tool positions: Servo driven, automatic 10 position
Swing over bed: 1,016 mm
Swing over cross slide: 635 mm
Bar capacity: 101.6 mm
Distance between centres: 1,295 mm
Maximum cutting diameter: 648 mm
Maximum cutting length: 1,118 mm
Rapid feed rate: 18,000 mm/minute
Spindle drive: 40 hp
Speed range: 50 – 2,400 rpm Vector driven spindle
Spindle nose: A2-8
Tailstock taper: 5 Morse
X-axis travel: 432 mm
Z-axis travel: 1,118 mm
Machine dimensions: Length 528 x Width 315 x Height 219 cm
Machine weight: 11,500 kg
 
Complete with: C-axis & Driven Tools; Hydraulic Tailstock; Tool Presetter; SMW Autoblock SLU3.1 (Capacity 20 – 165 mm) Programmable Hydraulic Steady Rest; MMK 15-inch Hydraulic Chuck; FSE Belt-Type Swarf Conveyor; Filtermist FX5000 Machine Mounted Oil Mist Filtration System.
 
Turret Tooling: VDI-40 Toolholders. 
Axial driven toolholder: 3-off VDI-40 ER32 collet toolholders.
Radial driven toolholders: 2-off VDI-40 ER32 collet toolholders.
Boring bar holders 11-off 40mm; 25mm; 20mm diameter.
Turning tool holders: 6-off B6 form 25mm x 25mm square tools.
Facing tool holders: 2-off C2 form 25mm x 25mm square tools.
Collet chucks: 4-off ER25 and ER32. 
Tapping chucks: 2-off ER25 tension only.
Boring sleeves 40mm O/D: 1-off 12mm; 1-off 16mm; 1-off 32mm
Drill sleeve 40mm O/D: 1-off x No 4 morse taper.
VDI-40 Tool tightening fixture.
Chuck jaws: 1-off set of hard jaws. 

Many sets of used soft jaws are available with the machine.

N.B. Although the above information is believed to be accurate and has been obtained from what we consider to be reliable sources we advise all prospective purchasers to check all important aspects of the machines capability prior to its purchase. It is the responsibility of the purchaser to ensure that the machine is suitable for the purpose for which it is being purchased.
This Item Has Been Sold!
click large image for full-size version
 
 
 
 
 
 
 
 
 
 
 
 
 
spacer
Elite Machinery Ltd.
Registered in England & Wales No. 04260662
Copyright © 2008 - 2024 Elite Machinery Ltd. All rights reserved.
Site designed & maintained by Cybacat
CNC Lathes
01527 276220