Elite Machinery

Haas VF-OE Vertical Machining Centre

Haas CNC Controlled 4th Axis Unit 

Year: 08-1995
Serial number: 5414
Control system: Haas
Spindle speeds: 0 - 7,500 rpm
Spindle motor: 10 hp 
Automatic tool changer:20 tools
Spindle taper: BT-40
Table surface area: 914 x 355 mm (36 x 14 inch)
X-axis travel: 762 mm (30 inch)
Y-axis travel: 406 mm (16 inch)
Z-axis travel: 508 mm (20 inch)
Max/min spindle nose to table: 101 mm to 609 mm (4 to 24 inch)
Table weight capacity: 1,362 kg (3,000 lb)
Cutting feed rates: 0 to 5,080 mm/min (0 to 200 inch/min)
Rapid feed rate: 18,000 mm/min (710 inch/min)
Maximum weight on table: 1,360 kg (3,000 lb)
Machine weight: 3,628 kg (8,000 lb)
Foot print: 2,235 mm width x 2,375 mm) depth (88 x 92.8 inch)
Machine height: 2,654 mm ((104.5 inch)
Complete with: Haas CNC controlled 4th-axis unit fitted with a 215 mm (8.5 inch) 3-jaw chuck; with matching tailstock; Centre height of 4th axis unit and tailstock 150 mm (6 inch); Chip auger; Programmable coolant; RS-232 port;
N.B. Although the above information is believed to be accurate and has been obtained from what we consider to be reliable sources we advise all prospective purchasers to check all important aspects of the machines capability prior to its purchase. It is the responsibility of the purchaser to ensure that the machine is suitable for the purpose for which it is being purchased.
Elite Machinery Ltd. Unit E, 49 Arthur Street, Redditch, Worcestershire B98 8JY
Registered Office: 33 Brotherton Avenue, Webheath, Redditch, Worcestershire.
Registered in England & Wales No. 04260662
Copyright © 2008 - 2021 Elite Machinery Ltd. All rights reserved.
Site designed & maintained by Cybacat
Vertical Machining Centres
phone 01527 546969